hi
i am putting some new floor joist in the loft for a conversion. One end is sitting on the wall plate. the other is going on hangers off an rsj how do i fix them to it???? is it get a gun and shot nails throw wood and steel and hang them like that? also how many noggings do i need in each...
hi my boiler is not working when you turn it on the temp starts at 20 and gets to 40 in 10secs and starts banging very very load and then it cuts out. the water pump in the cupboard is working. you can hear water running in to the boiler very slow. I have flushed with water the system had some...
hi job
what i did was undid the trv at the rad turned tap off and put a bucket under rad pipe to drain the water from the rad when that was done i opened the trv and water flowed out. turned the tap the other end and water flowed throw the rad so no blockage. And i did bleed all the rads...
Hi all my rads are red hot apart from 1. the pipe going to the rad is red hot i undid the trv and water came out i put a hose pipe on the rad and opened the other end and water came out. so why is the rad not getting hot?????????
Please help my wife is doing my head in.
thanks
Temperature is Rising Too Quickly
when i put the boiler on if will get from 52 to 82 in about 25sec then some times it will do is slower like go to 77 the 76 the 77 then up to 82 and shut off afor 3 min then fires up again
is this normal?? it is a gloworm 18hxi.
i have just drained...
hi
do you need the room temp switch on the wall for the ch.
if you have the adjuster on the rads dont no with it is called.
just because the leaver on the 3way valve only moves very little if at all when the motor turns the leaver is loose.
but when i took the wires off the leaver went...
HI
should the 3way leaver move all the time when the motor turns? and should it be loose? when i took the wires off the leaver came stiff and move the motor.
Thanks
hi did you get this sorted out if so where did the wires go from the 3 way valve i have the same problem and same honeywell and twinzone box.
just need to no where the white and orange wires go??
Thanks
hi again
my 3 way is a honeywell v4073a and the box it is being wired in to is a twinzone system wc1/Lwc1 now the 3 way white wire is for heating on so where do i wirer in the the twinzone box? all so the orange to boiler and pump where do i wire that>>> the box has
HTG ON
HW ON
HTG...
Hi
If i put the ch on the rads come on hot after about 1 -2 hours if i put the hw on at the same time the rads upstairs get hot about 1-2 and the rads down stairs stay very cold all day untill i turn the hw off. if i run a bath all the rads go cold very quick. i had a new 3 way fitted last...