Recent content by Sureheat

Hi , i am a heating installer involved on a new build of apartments the client wants the flue to go through a ridge vent outlet, the spec ridge is a forticrete dry system, my question is we are looking at using a valliant boiler with a ridge terminal flue, there is a ridge that is used for this...

hi Richard ,they are going onto plywood floor in a bathroom , but not a wet room so shouldnt be that much water involved,interested in the adhesive and laying method on these if possible.

Hi Guys, Im a plumbing and heating engineer , done fair bit of tiling, my sister wants a new bathroom she has picked the gulf stone tile, u know the one with the sparkles in .Any advice on the installation of these ,adhesives , grouts, do i need to seal.I was thinking of a rapid set...

Hi Guys im a heating installer, just a querie , what size cable do you need supplying a spur to feed a boiler,i was under the assumption that 1.5mm T & E is sufficient , just an electrician doin an inspection and testing and he has noted it needs to be 2.5mm.What is the crack with this one,any...

Hi , what adhesive brand would anybody recomend for a 300mmx600mm wall tile , any ready mix available or will it have to be the powder mix? Any thoughtys appreciated.

cheers for that these jobs are for a boiler contract , fuse boards were replaced in 2006 gas meter approx 3 feet away from board yet not done, water a bit of a stretch but my sparky did it in no time really, these should have been done at time of new boards right?

so u agree though spark123 it is required when adding new switch spur to system

cheers for that

Hi all im a heating engineer , brought in my sparky to add fuse spur, its a tt system no earth to gas meter , fair enough , but he also said water needed earth to is this required ? Cheers

hi all is there anything can be done with grout in my shower area it was white epoxy now its kinda yellow

Ok men hows it goin right i need to build me self a front garden wall , pillars and all that , im looking at the dare i say it the bricky tool ,anyone know if i can use for a 9 inch wall , or shall i bite the bullit and do it the normal way,looks like i can save time money and have a decent job...

thanks for replies people ,ill forward these diagrams to the spark see what he thinks hes experienced with s and y plans so he should be able to modify it to the highflow.

Hi all im going to be upgrading a heating system,installing extra rads upgrading pipe work etc.The boiler is a worcester 400 rsf electronic higflow.layout is boiler has integral programmer for hot internal store and for central heating.What i want to do is to have two zones for the central...

ideal mini c do a diverter valve kit that does aswell

My experience with these boilers showing up as pre heat light flashing and nothing else ,it is mainly caused by the air pressure switch starting to fail,on occassion it has been the pcb but mainly air pressure switch,if it happens to any engineers out the there take off the combustion chamber...