Hi,
2.6M span with 125mm X 47mm C24 @ 600mm centres. Topped with 18mm OSB and epdm rubber. Its a sectional concrete garage (2.6M X 4.8M) looking to replace current roof with a new flat one. Does this sound ok?
many thanks
Hi,
The cupboard door of our integrated washing machine sticks out by about 3mm, its driving me mad I can't take it any more :mad:
In an effort to fix it I need to move it back but it just wan't budge! There are no screws going into it from the cupboard next to it and I've downloaded the...
Hi,
I have a concrete garage at the end of my garden, its 2.5M X 5M right on the boundary. I'd like to turn into a workshop. I'm planning on replacing the roof but want to make it larger so it overhangs making the roof 3M X 6M.
So the internal building will remain the same at 12m2 but the roof...
Hi,
I'm looking to order 1.3 m3 of concrete for a shed base. A quick google search tells me the average price is £75 per m3 plus delivery (from checkatrade link below). So I'm thinking about £200. I've had 2 quotes and both have been over £450.
Am I being over quoted? I'm based in Birmingham...
Hi,
We think the drain leaving our property may have collapsed right under our neighbours rear extension. We are at the top end of a run so the drains all flow downwards from our house. The collapse does not affect out neighbour as their drains connect up after the collapse.
Who is responsible...
Anyone tried this? numerous internet posts suggest it works but seems a little too easy..but then I do like easy if its an option ;)
35cm pine stump been dead a year or so, thinking of drilling a bunch of holes and letting petrol soak in
Hi,
I noticed a few weeks ago the pressure in our combi boiler had risen to over 2 bar. I removed about a pint of water from a radiator bleed valve and got it down to just over 1 bar.
Now 3 weeks later the pressure has risen again to over 2 bar. The heating is switched off and has been all...
Hi,
Typical concrete sectional garage with a tin corrugated roof. I'd like to replace it with a pent wooden roof (rafters every 60cm going width ways then OSB board and felt).
A generally heavier roof, would there be any issues with this?
thanks
Hi,
I want to move a concrete garage onto an area where there is currently a patio, rather than get it all up would there be any merit in just pouring a 50mm slab over the current patio? The garage is used for general storage
I notice the garage is currently sitting on a 50mm slab on top of a...
Hi,
I need to fill some holes in the wooden cladding inside a camper van...so there's going to be some movement and shaking, is there a flexible wood filler around? I couldn't see anything in B&Q today.
thanks
Hi,
Just a cupboard door 63cm X 180cm. Can I just put some hinges on a single piece of plywood? Vaguely aware there are things called "styles" and "rails" but wondering if they just decorative :)
Ta
Hi,
I have a few small rust spots (about 7mm) on my car door. I don't need a perfect finish but just want to make sure it doesn't get any worse.
How to go about it?
thanks
Hi,
I'm contemplating moving a concrete garage. Every time I've mentioned this I get warned about asbestos in the roof!
I think it might be tin, a magnet will stick to it. Did they mix asbestos and metal? Can I safely remove it?
thanks
Hi,
My girlfriend has the old nissan micra (k11). About 30% of the time it will not start, the starter motor turns but very slowly...like the battery is almost flat.
Then you leave it an hour come back and it will start straight away (starter motor turns very fast).
Is it the starter? or...
Hi,
Can anyone advise how easy it would be to break in through these doors? They are pretty old but do have a multipoint lock and an extra key bolt thingy.
Any tips much appreciated
Cheers
Hi,
So I guess it is the opposite of a crack, a line or ridge running down the wall. I have tried sanding it down and re painting but it re appears straight away.
At first I just thought I wasn't sanding it enough so I sand it again until there is no ridge and re paint...but it comes back...
Hi,
I noticed our boiler pressure started dropping and traced it to a leaky John Guest elbow fitting. It looked like it had almost completely unscrewed itself with the pipe still fully inserted. It has been fine since installation 6 months ago.
I took it apart, inspected it, put it back...