Search results

  1. M

    TOWEL RADS

    Yes, once it programs to go off, everything is fine and boiler goes off, it's just the continuous firing up when the h/w is programmed on, i thought it may be because the pump is sending water through the towel rads continuously, and like i say the water gets scolding hot even tho temp is set...
  2. M

    TOWEL RADS

    Thanks, It just seems like the boiler is constantly firing up, and the pump is always on which i presume is down to the towel rads being fed, my h/w tank thermostat is set to 60/70 degrees but the towel rads get scorching hot, could i have a thermostat problem, it is a honeywell(from memory)...
  3. M

    TOWEL RADS

    Hi, I have finally had a new pcb board fitted to my potterton suprima50 boiler after suffering lock-outs for a few months. Everything seems to be fine but i am a little concerned as the towel radiators are still running hot even though i have turned the c/h off at the box downstairs, i have...
  4. M

    POTTERTON BOIULER LOCK-OUT

    Ref Blackadder, if you read my post it does say it is an old problem that started a few months ago, so yes i have posted before, but unfortunately i have been waiting 6 wks for my plumber to sort the problem after he was the one who fitted the circuit board, and as i had paid him £330 i don't...
  5. M

    POTTERTON BOIULER LOCK-OUT

    I'm sure i will get everyone telling me how bad these boilers are but my problem is this; A few mths ago my boiler packed up, it was due to a circuit board problem, i had a re-con circuit board fitted and a few wks later it started locking out, i have been waiting for the said plumber to...
  6. M

    BOILER LOCKING OUT

    Plumber was from a local plumbing spares shop that my dad went into. Original fault was caused by diverter jamming and this burnt part of the board , was shown the board and it was evident that something had burnt, was told that new board would cost £400 but he had a re-con one that he would do...
  7. M

    BOILER LOCKING OUT

    The red light is flashing when it goes into lockout. The boiler came on today at 2pm, but as i was going out i turned the heating down to 15' when i got back it had locked out again, i hit the re-set button and it went to green then straight off again to red flashing, turned the temp up to 19'...
  8. M

    BOILER LOCKING OUT

    Had a look at the thermostats on boiler both the one under the plastic cover at the top and the one located on the side are set at 60' when i turned the one on the side up the diverter kicked in and the boiler fired up when i presume means it is working fine, turned it back down to 60 yet the...
  9. M

    BOILER LOCKING OUT

    Thanks, Know what you mean with regards some Plumbers, just think it's a shame a few bad uns give others a bad name. I still have a nagging doubt that its the thermostat but its probably more than a coincidence that the problem only started a few weeks after the re-con board was fitted. Might...
  10. M

    BOILER LOCKING OUT

    Hi, Hope someone can help me out, i have a potterton suprema boiler and had a recon circuit board fitted in January, but 6 wks later it started locking out, it is ok once i re-set the re-set button but keeps on locking out up to 5 times a day now, i had same plumber back and he changed the...
  11. M

    shower pump problem

    Respect Richard c!!!!!!!!! Tried undoing the fittings and it seems to have done the trick, i don't believe it was fitted correctly in the first place so i suppose i will encounter problems again but at the moment it is back up and running again, Thanks.
  12. M

    shower pump problem

    The pump is in the airing cupboard above the hot tank, the cold&hot pipes for the shower have been diverted from loft to come into the pump & then back up into the loft and across and down to the shower. When the sink was being fitted they turned off the cold at the mains under the sink, and...
  13. M

    shower pump problem

    its a salamander pump, it has been fitted for about 18mths now, i did have a similar problem before which i found to be due to the flexi hose on the hot pipe being kinked, but once this was straightened it was fine. Its as though not enough hot water is getting to the pump, yet both the in/out...
  14. M

    shower pump problem

    I have a gravity fed system hot tank in airing cupboard top of stairs/cold tank in loft, due to low pressure off the hot i had a shower pump put in, but y-day as i was having a new sink fitted in the kitchen i had to turn off all the water, when this was all put back on i now find the shower...
Back
Top