Search results

I have been asked to quote on a large ish new / re-wire and they want a price for labour only on a per item basis. Does anyone know of a good reference for these prices as I've worked it out roughly on time but want to check against other sources. Thanks, Mark.

How do i get to the sockets in there.

Didn't know where to start

What happens when 32A ring backfeeds to 2 1.5mm in one way courtesy of diy outdoor lighting.

loose Neutral

loose Neutral

loose Neutral

This is what he gets up to when I'm not looking

Found inside my garage when I moved in

Bathroom fitter unique fan possition. Yes that is the shower door.

This was behind the Henley blocks

Henley blocks joining 100A 25mm tails to 10mm T&E

Pics I've taken on my mobile whilst out working.

Just so you know what we are on about with the parallel circuits thing, its because if you send, for example, 50A down two different sized conductors the load will split, albeit un-evenly, between them and you would risk the smaller conductor over heating and setting fire to your home.

Board is memsheild 2 125 TPN if my memory serves.

The hob seams fine as it is on the old cooker circuit (get it checked as it is old). Definite no no on a "parallel circuit" if you blue a fuse on one circuit the other would still be live and overloaded. A new circuit would be best, but you could ask your electrician if they...

Thanks for replies. I also thought I could run new tails from switch disc to separate rcbo box, but it makes things untidy. I'll see what space I have left on the wall in the morning.

As for the rcbo it can't go in the main board as the neutral would be on the next L1 phase pin. But I could use an rcbo remote instead of the rccb.

Its a swimming pool complex but on a domestic property.

I have to supply 3 phase and neutral, rcd protected, to a steam generator from a non rcd 3 phase board. Do you agree i should use a 3 pole mcb and then fit a 30ma 4 pole rccb remote to the main board or can anyone think of a better method ? Thanks, Mark.