Search results

Hi All, Wanted to find out if theres anyone available to finish of an installation (configuration) of the texecom elite alarm. Ive recently had a baby and haven't had a chance to finish off my brothers installation. Ive installed everything (door sensors, room sensors, GSM, Control Panel...

Hi All, Ive recently installed aTexecom Premier 48 unit with 8 PIR detectors, 3 Door impact sensors and one bell. The extra modules are ComIP and the GSM module. Ive configured the IP address via the keypad set the Subnet, Gateway and the default port of 10001. Ive tried everything to try...

Hi All, I would like some advise for a new alarm that im intending on buying. I have listed the items below and wanted to find out if all is compatible with the elite 48 control panel and if 3 keypads can be installed. 1x Texecom Premier elite 48 3x Texecom Premier Elite Diamond Black...

Hi All, Once again, Im back with the same problem. For the last two years Ive lived with the Aico beeping smoke alarms but now is enough. The problem I have the first alarm in the chain constantly beeps at random times. Aico support are useless, spoken to them many times but they...

Hi All Seem to be having a major problem with the Aico ei2100 multi sensor smoke alarms For the past six months, through out the day or night I get a loud beep from the alarm randomly, sometimes every couple of mins, sometimes, every 10 - 20 mins, sometimes a few times in the day. Ive...

Hi All, Having used the texecom system for 3-4 months now, Im now getting a System Alert on the LCD display, message which reads: Low Battery for user X. I thought the battery life on these key fobs were meant to be for about 2-3 years. I probably use the key fob 4 times a day max during a...

Hi All, Ive got the Texecom Premier 48 system with the GSM dialler. Its been working fine for the last few months since the final installation. This morning I couldnt set the alarm for some strange reason. The errors on the screen im getting is: ATS Path fault Coms 2 error - GSM Module...

Hi All, Part 2 to my installation now. Ive recently purchased the ComIP module for the 32Xp Wireless expander which Ive installed. How do I assign an IP address or what is the IP address. Ive tried everything and searched the net as well as reading the manul but doesnt tell me how to...

Hi Not sure if this is the right place to ask.......... I wanted to find out if anyone can recommend anyone to do a Texecom Install in East London. All the cabling has been laid to the correct positions due to the flooring/ plastering taking place. Wiring all goes back to the Premier...

Hi All Need some urgent advise on Quartz tiling. My dining and kitchen floor is 65sqm and very uneven. The old tiles were removed today. The floor needs to be raised by just over an inch/ inch half aswell. The tiler said he will raise the floor and level it out using screed. But at...

Hi Got a slight issue. I have an RCBO for the Smoke Alarms on a 17th Edition CU. As the CU has two Neutral bars, the Smoke alarm RCBO was connected to the first neutral bar same as the first RCD set. The issue is as soon as you switch on the power it trips the RCD, which makes sense...

Hi I recently had American White Oak installed pretty much everywhere, doors, door frames, door architraves, skirting boards, stair spindles. Wanted to find out which clear varnish I should use. i've looked at the Sadolin range but am confused if I should go for the Polyurethane clear...

Hi Ive recently purchased a 8KW steam shower which will be installed in the next month or two. I need to run new power cable from the fuse box as well as purchase a new MCB. Wanted to find out what sort of cable I will need to purchase and what MCB rating needs to be installed. Thanks

Hi All, Recently had some plumbing work carried out and the first plumber installed cock stops to isolate the water for the first floor and loft. Another plumber turned up and mentioned stop cocks are not full bore and better of using full bore lever valves. The third plumber said stop...

Hi Guys I recently had new Aluminium rads installed in the house and they all came with the Aladin automatic bleeding valve. I wanted to find out if there any good as Im considering replacing the towel rad valves x3 and also the hallway rads x3 which is the vertical ones. They take...

Hi All I wanted to find out if anyone has placed any LEDs inside the shower area. Im looking to place some LED bars inbetween the tiles in the steam shower and would like to find out if this would be appropriate. Also any suggestions on where to buy some LED Bars Thanks

Has anyone got any recommendations for underfloor heating. I need to buy a 2 zone underfloor heating for the kitchen and Dining room and want something which is pretty good and easy to install. Ive come across Begetube......

Hi All, I recently had a new Megaflow 300L installed with the Vaillant 637 System Boiler. The main water pipe is a 32mm blue pipe which comes to the side of the house, then for a few meters drops to 25mm then drops to 22mm before it goes into the water softner The pressure gauge...

Hi All, Recently got burgled, overnight whilst we all were sleeping upstairs. They decided to take most items from downstairs like the plasa screen, keys, money, handbag, etc etc Ive been looking into House Alarms and so confused which one to go for. The ones I have on my list are...

Hi I have a Wylex 60amp Switchfuse and wanted some guidance on how to wire one of these up. Ive never wired one of these up and slightly confused on how to do it. Any help would be a great help. Thanks