Search results

I have installed a plain ceiling mounted extr fan in the b/room, seperate fom b/room light, but it wont work!! I have a FSU on outside wall fed from lighting circuit via junct box..from FSU i've ran a 2 core to a plain pullcord, Brown to coms and blue to L1,, from there, brown to L and blue...

What would be the best switch to use for isolating socket used for washing machine under worktop, on ring circuit? Also same applies to switch to use on 2.5mm radial from 16amp on C/U to socket that will power 3kw oven and ignition for gas hob??

What would be the best way to fit extractor hood, ie, from a spur off ring or direct to FSU on ring??

I need to fit 2 smoke alarms, 1 in hallway at bottom of stairs and 1 in hallway, top of stairs If i run 1.5mm T/E from 6amp in C/U to 1st alarm then 3core+e to the 2nd, would this work?? 6amp would be non RCD.. Also if wiring is run between stud walls where i cant get 50mm clearance, does the...

Can i run a 2.5mm cable on a radial circuit from a 16amp on the C/U to a socket that in turn will operate a 3kw oven and ignition for gas hob?? Cable run will be 10mtrs and it will be under floor.

I would like to install a plain extractor fan ( no timer ) seperate from the bathroom light. If i take a lead from the lighting circuit ( via junction box) down to FSU on the outside of the bathroom, then on in to a pull cord switch and then fan. Would this be ok??[/wiki]