Search results

I am fitting a new bathroom suite in my bathroom but have come across a problem. the pipes in the bathroom are 3/4 inch and the couplings and pipe i have are 22mm i have checked with all the shops in my area but cannot find one that sells 22x3/4 compression fittings or anything like it. surley...

Yes they are rated for zone i,2and3

I have just bought a set of 5 halogen downlights. What i want to do is replace my excisting bathroom light with the set of five, how and what is the easiest way to link all five up to the wires from the old light, Thanks in advance :?:

I was wanting to buy a 10x10 wooden workshop to put in my garden but i have recently been told that i would require planning permission for this and for anything bigger than 8x6. Is this right :?: ________________________ Moderator in short please see item 11 thanks

Believe it or not but i have lived in this house since it was built and that was in 1968. Also the two black wires are joined together and the red cable comes from the same conduit but then goes straight to the other without a join. how do i determin which black wire and shall i just split the...

I wanted to put a light in my loft with a switch so i was just going to tap into one of the roses from another room. The thing is the conduit is all metal and so are the roses the one i had a look at had 2 conduit pipes coming out of it one pipe had 2 black wires which were joined and a red wire...

:roll: I want to install a set of 10 low voltage L.E.D lights in my bathroom, i have checked the box and instructions and they are suitable for zone 1, 2 & 3 the only problem is they come connected to a three pin adapter, now someone earlier on in a different question suggested i put a three pin...

Thanks for that is it ok just to connect the transformer up to the exsisting light rose and just use the same switch and as for the L.E.D lights you are right it is a transformer plug but i have checked and it says ideal for zone 1,2 and 3 in the bathroom. I think i will just run a cable...

I have installed a outside power socket with rcd the thing is i ran a spur from a socket to a fused connection unit and then to the outside socket with built in rcd. The problem is the sockets work ok but when i try to switch it of from the fused switch it doesn't go of only when i switch it of...

I am redecorating my bathroom and want to install some low voltage lights i bought these in a ready to go pack from B&Q a pack of ten. I also bought a pack 10 of L.E.D lights ready to go the only problem with the L.E.D lights is they come with a plug. First of i want to keep the exsisting 240...