Search results

many thanks captain, have ordered new unit, will let you know how i get on, thanks again,

MY DRYER, SEEMS VERY SLOW TO START TURNING, I HAVE STRIPPED THINGS DOWN, AND IT SEEMS THAT ONCE TURNED ON, THE DRUM NEEDS THE SLIGHTEST OF PUSHES ( 1 FINGER ) TO GET IT ROTATING. I HAVE NOTICED THAT IF I TAKE OF THE ELASTIC BELT THAT DRIVES THE FAN, THE DRUM WILL START NO PROBLEM. BUT BOTH OF...

following my posting on here, i have now been told that this is not a major problem, it comes from renault, that all it means is that the battery needs charging, and once the warning goes off, it is doing exactly that, charging, so that may be why it is not happening every occasion. i had mine...

HI ALL, I HAVE A SERVIS 1500 AA, MODEL M6815W, AND I FIND THAT WHEN THE WASH GETS TO THE DRAIN STAGE, IT SEEMS TO BE PUMPING FOR AGES, BUT SOUNDS AS THOUGH THERE IS NO WATER LEFT TO PUMP OUT. I HAVE CHECKED THE DRAIN, AND IT IS CLEAR, CAN ANYONE TELL ME HOW LONG THIS PROCESS OF PUMPING OUT...

hi all, i have a creda ceramic solar glo cooker, one of the plates has gone, any suggestions on how i find a replacement, and how to do the repair itself, any help would be appreciated, :D

hi there, i have a 2003 renault laguna initial diesel sports estate, a while ago, the sat nav system stopped picking up the satelite signal, and we are often driving in th north sea, or irish, about the same time, our clock started playing up, when you get into the car, you can set it...

great work zipper, purchased a new element, and touch wood, i have had 6 or 7 complete washes without any problems,, thanks again, you do a great job on here, and save everyone stress and cash, regards mike

thanks for that, i have son in law to check , but can you tell me what resistances should be on the tacho and motor terminals, so he can see if they are ok

thanks again zipper, the model is a candy grand o GO282/1-80 SERIAL NO IS 3100250708520804 REGARDS, MIKE

thanks zipper, the engineer phoned today to tell the wife that he has asked around ????, and it will need a new motor, quoting £360 to replace after picking myself up, i re read your response, and wondered if you thought that it may be sensible of me to send the pcb away for testing/ and or...

many thanks again zipper, i disconected the two terminals from the thermo, but not the earth, and ran it on a rapid wash @ 50o, and it ran all the way through. but i did not get any error code for the thermo at all during this process. the heater has been working fine in the test washes ...

many thanks for your fast answer zipper, today, i stripped down the entire waste, from the drum to the drain, even split the pump, and nothing was found ( this is an ex display model, and i believe that only i have used it in testing ) so i put it onto a rinse programme, and low and behold...

my daughters candy grand go 282 which is almost new, very little used, during wash cycles, it stops, and the stain lcd, and the 90 m lcd flash, 3 times, then go off, then repeat., while its been dodgy, we have tried rinsing without cloths in the drum, and it worked ok, other times it just...

hi there, i have a very new whirlpool aw od as127, very little used, and has been stored for a year, following the reconnection, i managed to get one or two washes out of ot, before the code 06 flashes, and the wash aborts, today ive had an engineer look at it, and he checked connection, and...