Search results

thanks for reply, i have booked Hotpoint engineer.

Hello, help please, i brought module PCB for hotpoint fridge freezer (FF187L) but found out later need to program, but there is no instruction or manual came with it for programming, please help me if any of you have any idea, thanks.

i thought external speaker faulty but i have tried without internal and external speakers still fuse blown twice, doesn't blow straight away, blows between 15 to 30 minutes, last 2 days no problem with both speakers connected, will see what happens in future, thanks.

speaker fuse was blown, i have replaced 3 time now ok with forth one, no idea why. thanks

Hello, i like to reset my alarm to factory default, in manual telts to put link then power on but no other information, do i have to disconnect all PIR, battery or bell etc.

yes main power is on and there is battery is well, all PIR have no lights when you walk around all rooms.

Hi, I got honeywell optima compact 8EP396A Alarm, suddenly gone very quite and doesn't set at all, even chime have a very low sound, when i enter setting code or engineer code doesn't do anything, if any one have any idea please let me know, thanks.

you can buy from ebay around £50-60

you right, there is thermistor on top of evaporator, I have found it, but there is three connector on PCB and all have black ,blue and red, no idea which goes to thermistor.

there are only 4 component in freezer compartment. 1 heater 2 thermal fuse, square inch box that sits on evaporator that linked to heater 3 fan 4 temperature sensor, that sitting on the floor under the draw, that control freezer temperature when thermal box get covered by ice its closes and...

hi thanks for you reply, hotpoint supplied sensor with heater, its call thermal fuse that fits on heater.

Hi, is there anyone who can advise me regarding hotpoint FF187L fridge freezer, there is lots of ice building around the heater, I have changed heater and thermal fuse still ice building, if I defrost it by switching off then works for 3 weeks, thank you.

hello, need a help please, i have recently installed alarm system, working fine except when you enter from main door too unset, the alarm goes off immediately, there is a PIR in passage zone 2, that suppose to be inhibited zone and 1 is timed zone for door contact but that is not in use, i have...

chaindaisy

been sorted, chime was on, thank you for interest.

honeywell optima compact 8EP396A, CHIME IS OFF

hi i was programming optima compact panel and something went wrong,when i walk in rooms zone LED comes up and beeps when system is unset,i think still in walk test mode c't exit

no i haven't done all that, i programmed only parts, i thought exit/entry time already been programmed

used zones

1 for whole house 2 FOR D.S 3 for U/S