Search results

:? ????? not sure where youre coming from baxpoti!? if you don't want to help then fair enough.........I thought the idea of this website was that people helped each other???

Rojaca, 1.) Pump is running, fan running, i belive the elctrodes are sparking but not sure 2.) Burner demand light is on 3.) Controls are red

Currently have no heating or hot water on a Baxi Bahama 100 due to boiler not firing. I have had the two flow switches replaced and also the thermistor and themostat. Still no good. any pointers? Plumber has said it may be either the spark electrodes or maybe the PCB?

Apologies if this is a dumb question, but how will i check if the thermostats are ok or not?

My Hotpoint ultima tumble dryer model TDC 62 is operating, but there is no heat. Presumebly thr element has failed? is this repairable? Any help appreciated! D. Cooper

Not entirely sure whether the 3-port valve is working or not? Is it likely the problem lies with the 3-port?

I have a conventional boiler system, working in conjunction with a 3-port valve, room stat etc. The hot water comes on via the programmer as normal, however the heating does not. The programmer heating light comes on to call for heat, but the boiler does not fire. Following a previous problem...

I have a 'traditional' boiler set-up, with a seperate HW cylinder. There is a problem with the operation of the 3-port valve in that when hot water is called for, the heating also comes on. Presumebly the cause is the 3-port valve, but is it likely just to be a new actuator required, or could it...

Apologies!! The boiler is a worcester 280 combi :D

When hot water called for boiler makes loud clanking noise. On heating boiler makes no noise. Any ideas?

Problem with re-lighting boiler - Pilot light goes out on release of grey button. Seems that the safety device is cutting off the gas supply on release of button - tried following instructions on resetting but to no avail? Faulty gas valve? :?