Search results

Perfect, that makes sense! Many thanks, William

Yep. I work with automotive diagnostics and electronics all day but I'm a bit lost with household stuff!

Hello, Recently had ceilings plastered and decorated....thus ceiling roses have been disconnected. Also, during the same works I moved the upstairs light switch and ran new cables, before re-plastering. Now I'm trying to connect hallway lighting back together and I cant to the life of me...

Thanks for the prompt replies. I need a tank pressure feed to give a balanced feed to a thermostatic shower mixer, was hoping these came into the bathroom already. House is within the last 15 years old and doesn't look to have had any modifications to plumbing elsewhere so was wondering if...

Hello, My cold water tank in the loft feeds the central heating & the hot water tank. There is two additional 22mm cold feed's from the tank which are converted to 15mm shortly before they disappear through the floor of the immersion cupboard. I presumed these fed the bathroom, but taps...

Hello, Removed all the tiles from bathroom. Planning to skim some areas and paint (no-longer want tiles there) and re-tile around the bath. All adhesive has been removed to leave a surface as shown in the photo. There is a few areas where the plaster came off with the adhesive and paper...

Hello, Many thanks all, I think this clears up my question! Understand the ideal location is next to the HW cylinder on the floor but in my case that does'nt really work so I will have to go for the loft. Cheers William

Hello, Thank you. Ok, the HW tank is fed from the same tank as cold water (HW tank in cupboard, Cold water storage in loft). Does this mean I can mount a positive twin pump in the loft with cold feed from the cold storage tank and hot feed from a flange on the tank below? Kind Regards William

Hello, Hopefully a quick one; Got to install a twin shower pump in the loft (to feed two showers in separate rooms). Can probably get enough positive pressure on the cold side, but hot will be pulled from the HW tank in the airing cupboard below (thus a negative head??). Does this mean I...