Search results

100% correct thankyou part bought from partmaster for 19.99 and we paid the 9 for nextday deliver as we have two babies and the misses was in a panic third time in a year i have had to repair this machine 1st was the waste water pump went on the blink would not drin the water itself i had to...

hi guys im having problems with my above washer dryer im putting it on drying function and its coming up with a E10 fault code , it washed last night fine and i belive it is washing ok . i have cleaned the condenser out inside checked all of the pipes for blockages and bends ( they seem fine i...

if there is it has reset itself as dryer exhaust is still getting hot but the heat was not getting to the drum which is when i noticed that the fan was not spinning , the motor must of been what was making the noise and when giving it a knock it started spinning unwillingly and transfered the...

it is my fan motor , its almost like its seized but when you turn it it spins for a bit and then goes again

no heater cut out on back of machine

as above the washing , spinning cycle is perfect but the drying cycle is not drying our clothes they are coming out cold and damp the drum is moving freely i did replace the drainage/waste pump 6 months ago for another fault . no fault codes just runs through the cycle but no heat it was a few...

i don't mind him hijacking the thread tbh the guy is only looking for a little bit of advice , its not nice having no heat or water i know and all of the experienced corgi guys are fully booked this time of year and the biggest worry is cost

many thanks again he came this morning and has fixed it now and his diagnosis was spot on i guess the gas valve was faulty he said that there are diaphrams in there that fail from time to time , the water is absolutely boiling now , never was before just gutted that i paid for a new pcb fitted...

many thnaks thanks

ok the flame only lights somtimes so we now have our heating on constant at the moment because if we switch it off it may not come back on

no need to be suspisious we have had a bit of trouble with our boiler first of all we had a crogi engineer around who wrongly said it was the pcb and charged us £200 for fitting it but when i rung him back he will not answer call or return the calls ( i want to rport him to somone but dont know...

could somone point me in the right direction for an installation guide for a worcester 24i rsf boiler as i hve lost mine and our gas engineer has asked for them . I have the usewr guide and the tech spec guide but just wanted the fitting instructions guide many thanks

could you possible give me your contact details and are you corgi registered as i will have a service at the same time

thanks for advice , do you guys know anyone relible in the cardiff area

i've a fault on my worcester 24i , its not the pcb because i got 3 of them here 2 brand new and 1 original one . the fault is intermittent the flame lights regardless of if it is on auto or heating or hot water . the initial light is a small flame and when it trys to turn on properly to the...

agreed tony but hell its my nature not to trust anyone especially when it comes to money , You earn trust . yes i have just tried to tap the timer once and i sprung off the boiler in two or three pieces lol but i pushed them all back in place in order and it seemed to work just the same as...

yes that is a fair comment tony but almost every engineer i have rung does not want to come to the house and they are saying the pcb is knackered when i belive it may not be , but i am no engineer . maybe what i need to do is get a recommended engineer for the cardiff , south wales area . As for...

nobody ?

Hello all been reading a couple of posts and it seems like some of the members hear know what they are talking about so i will post my fault and maybe you can tell me the fault . please let me put your minds at rest i will make NO attept to fix this myself i just dont want to get ripped off as...