Search results

Thank you, I got home and found a video of how to put it into test mode and the drain pump isn't working correctly its in pieces now over the kitchen floor and the circulation and drain pumps feel totally different to each other, one is definitely not right and hopefully going to be the root...

Forgot to say I have already done the obvious and checked the filter and drain pipes etc ect for any obstructions.

My Samsung ecobubble washer keeps stopping during its first cycle with 35 minutes on the display, or occasionally 5E. Last night whilst it was stuck at 35 min I drained some water out of the drum using the tube on the filter housing, as the water level dropped the machine started spinning and...

just to close this out I followed the advice in the thread and left it turned off for a couple of days to totally defrost. It’s been sitting an -20 reliably since. Seems like a bad design of these frost free models but will keep an eye on it.

It’s what ever this is that says 86 degrees John

Well it’s fully defrosted now so whilst it was in pieces I metered out the heater which read 388 ohms which I take to mean it’s ok.I am going to give it one chance to redeem itself or its getting replaced with something that’s not a liebherr. Googling the model number cun3033 this seems to be a...

It’s garden rubbish day Wednesday so am going to throw all the food away tomorrow evening and leave it with its doors open to fully defrost for a couple of days. I don’t have any real faith that this will fix anything but it’s worth a try as it’s only been sitting at -5 at most recently.

John if you see this I am presuming this is too much ice and the result of the problem.

Thank you, John that is worth a try, i don't trust any of the food that is currently in the freezer so am going to throw it all away regardless so will give this a shot before consigning it to the scrap pile.

Other than the fridge sensor it's never been touched and there are no controls for the freezer, i dont believe it is possible to adjust the freezer temperature. I bought it as a frost free one but still food should not be soft to the touch inside it frost free or not.

Hi I have a Liebherr Fridge Freezer (CUN 3033) recently the freezer has not been cold it has been sitting between minus 2 to minus 10 at the most, is there anything i can check? I have already had to change a thermostat on the fridge on what was supposed to be a quality german product......

Thats worth looking into will have a google, I did see a guy on eBay offering £10 back on his refurbished units.

Checked it out last night, had power into the board through the suppressor (Thanks JJ4091) onboard fuse was also ok. As luck would have it exactly the same machine less than a mile away with ruined bearings on ebay, Quick deal done and board exchanged and we have a happy washing machine. Didnt...

I was beginning to wonder if that was the case with the manuals. It really is a pain to extract it from the kitchen so initially meted out the fuse in the plug which is fine, then tried plugging it into a different socket. Am going to extract it this afternoon and see if there is anything...

I have a Samsung Ecobubble (WF90F5E3U4W/EU) which died mid wash cycle last night. The device appears to be totally dead, and the power button does nothing. The main fuse in the plug is fine, I have also confirmed power at the wall, so am confident the fault is with the machine. Before I...

Appreciate that offer GalaxyGuy! I am indeed on SelfMon and am very impressed with the service! Will be in touch shortly via PM

Thank you for the quick reply gents, I will check the heartbeat tonight and confirm, GalaxyGuy is there a simple way to get the panel firmware upgraded is this something i can do myself? or will I have to engage the services of a professional?

Good morning, Am hoping that someone can help me to get to the bottom of an issue with my Honeywell Galaxy 96 G3 V6.5 Alarm. The panel has a E080-10 ethernet module V4.14, However every time i connect this module everything works however he alarm repeatedly goes into "Comm Fail Com 4" alarm and...