Search results

i charge £30 plus parts. I think i need to increase my prices!!

sounds like the installer has activated the service timer, to cause the system to lock up, till deactivated by engineer

what type of veritas is fitted? Zone 1 is usually the entry/exit zone. What happens when you enter your code? if no response try 4321.

if you email me thro profile, i will try and help you out, with the info needed.

Why do you need an engineers Manual?? I can supply a user manual if required

In an advert "Time Served Electrician", how long would you have had to been an electrician to be time served or is it to do with qualifications?, or does not mean anything theses days? :?:

Hello, Sometime when i receive calls, there is an echo on the line, how do you get rid off it. Does not tend to do it if i ringout. Using BT Studio 1500 Quad handset Thanks in advance

depends how much trade discount you can get

are you looking for something like this http://www.getplc.com/pdf/allcatalogue.pdf Page 64 of pdf or P62 of catalogue you add/change the inserts to fit the grid plate Hope this helps

it is to fitted inside bathroom, about 4m from door, next to the bath. was puzzled to how to connect as socket in bathroom would not be feesable, but no access above or below bathroom. it is a shower, with combined steam generator, for use as a sauna, as previously mentioned.

it has a moulded 3 pin plug then an rcd about 40-50mm from plug, then continues on to the control unit. abit like the orange one, but moulded on to the lead http://www.greenbrook.co.uk/pb.htm

does it matter whether or not i am registered, that is not the question that was asked. if you have no relevant advice then please do not reply

Hello, Has anyone ever connected up one of these. Been to look at one to be installed, anyone any ideas how to safely connect these? as they come with a 2m lead with built in RCD module. They are rated at 3Kw. Cheers Paul This type of thing...

Hello, is it normal for a 6A MCB to trip everytime a lightbulb blows?? Could it be a faulty trip or a Fault on the wiring??? Cheers

What is the diference between a Electrical Report and Electrical Inspection??

Hello, Been asked by a friend of the family if i can bond the Main Gas pipe to CU, is this notifiable, also what form to i need to use (MWC?) Thanks Paul

Email Me a telephone number and i will ring and talk you through what to do as it is easier then trying to write everything down. Thanks Paul ++++ Moderator's note: You can switch on email in your profile. Mod Rupert ++++++