Search results

  1. J

    Ferroli Optima 701 Breakdown

    Hello. My boiler has stopped working as the fan will not run. I have diagnosed the LEDs which show everything is fine. The top part of the fan runs freely so that isn't seized or sticking. There doesn't appear to be power to the fan, relay R4(Fan relay) does a lot of buzzing but as it is...
  2. J

    Boiler help/advice

    Any way of getting it working in the meantime? I've tired tapping the housing for the fan, just frustrating that it works sometimes. It was set on timer to go on at 730am this morning and eventually went on about 750. Should i leave it in the on position and hope it fires up at some time or keep...
  3. J

    Boiler help/advice

    Evening all. My Ferroli Optima 701 combi boiler packed up Friday night. i went to look at it and it made a buzzing noise when it tried to fire up and the fan wasn't kicking in. So i gave it a slap thinking the fan may be sticking and blow me it fired up! But not for long.... Since then it...
  4. J

    Switching a switched live?

    Hi thanks for the response. Realised my mistake ref the permanent live and the switch laying in bed last night! :oops: Bit embarassing but nevermind. Not an electric ian anyway actually. Probably easier to put the fan on a seperate fused pull switch then? I wasn't sure whether the fan...
  5. J

    Switching a switched live?

    Hi. Looking at installing an extractor fan and spot lights for the new bathroom. Her indoors doesn't want the fan on with the lights and wants the spots to be dimmers. Now, there are only switched lives at both the rose and the light switch and i can't access above the ceiling to try and...
  6. J

    leak on washer installation

    Thanks. Any ideas about the y piece problems i've had? Is plastic usually ok?
  7. J

    leak on washer installation

    But that will still leave the t piece joint leaking i think? Where the hot supply branches up off from the main hot pipe, the joint of the two pipes leaks when there is nothing connected ie washing machine to the hot end. Don't want to overtighten just in case of stripping or cracking the...
  8. J

    leak on washer installation

    Hello everyone! Not a complex prob but i'm not too clever on plumbing. Currys came to fit a new dishwasher and washing machine at the weekend. Awful they were, actually forgot to connect the washing machine up to the water before turning on first off! Anyway we have a hot and cold supply...
Back
Top