Hi i am just wondering if i am safe with this wiring, i have 10mm cable coming out of the consumer unit with a 40 amp fuse and after 4 metres the cable has a box with 3 64amp connectors joining a piece of 6mm cable wich then runs down to the oven.
I just want to make sure that the connections are safe and that the 10mm cable isnt going to burn the 6mm cable using a 40amp fuse with ony an electric double oven connected.
I just want to make sure that the connections are safe and that the 10mm cable isnt going to burn the 6mm cable using a 40amp fuse with ony an electric double oven connected.