Hi,
I have an off grid system where led lights are run from 12v leisure batteries with light switches.
I have put blade fuses on all of the connections using these;
http://www.ebay.co.uk/itm/4-WAY-STA...arts_Vehicles_CarParts_SM&hash=item3f06854cbe
However I was wondering whether it would be safer and neater to use a consumer unit. That way I would be able to have one set of clamps on the batter instead of 3.
Can I use a 240v consumer unit and put different fuses in or do I need a 12v one.
Any suggestions. This is for the tack room at a stables yard not a domestic installation.
I have an off grid system where led lights are run from 12v leisure batteries with light switches.
I have put blade fuses on all of the connections using these;
http://www.ebay.co.uk/itm/4-WAY-STA...arts_Vehicles_CarParts_SM&hash=item3f06854cbe
However I was wondering whether it would be safer and neater to use a consumer unit. That way I would be able to have one set of clamps on the batter instead of 3.
Can I use a 240v consumer unit and put different fuses in or do I need a 12v one.
Any suggestions. This is for the tack room at a stables yard not a domestic installation.
Links in this post may contain affiliate links for which DIYnot may be compensated.