Does anyone know where i can get an internal door measuring 2040x726 that is 40mm deep and that is half glazed preferably with a panel design
2040x726 internal door
- Thread starter adam74
- Start date
Sponsored Links
Hi,
Go to xljoinery.com you can download their brochure and look at the range of doors. I have just purchased exactly what you are after. The site has a store locator so you can find a stockist in your area.
Hope this helps.
Go to xljoinery.com you can download their brochure and look at the range of doors. I have just purchased exactly what you are after. The site has a store locator so you can find a stockist in your area.
Hope this helps.
Have you looked in your local DIY sheds? Focus? Homebase?
What about a local Bulders Merchant like Builder Centre?
You'll most likely have to trim it down anyway so get the next size up. You need to measure the tight size of the door frame and then deduct 10mm to give a 5mm edge clearance all round the door when closed.
What about a local Bulders Merchant like Builder Centre?
You'll most likely have to trim it down anyway so get the next size up. You need to measure the tight size of the door frame and then deduct 10mm to give a 5mm edge clearance all round the door when closed.
Sponsored Links
No need to trim as doors of this size can be bought, as I have just done from my local hardware store, who ordered from xljoinery.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
