Guys I need a bit of assistance please. I have a zone that every few weeks triggers the alarm and I want to try setting double knock on it. I thought that I had done this correctly but opening a window on this zone still triggers a full alarm. I thought that I would need to open and close the widow twice in a five minute period to activate the alarm.
This is what I did. After selecting the zone in installer mode I then key in X3 and hit the tick and see that a 'D' appears which I assumed indicates that the system is now set up for double knock on this zone. I then get out of installer mode. If I'm not doing this right I would really appreciate some words of wisdom please!
Very many thanks.
Richard
This is what I did. After selecting the zone in installer mode I then key in X3 and hit the tick and see that a 'D' appears which I assumed indicates that the system is now set up for double knock on this zone. I then get out of installer mode. If I'm not doing this right I would really appreciate some words of wisdom please!
Very many thanks.
Richard