Hi all
back in February I asked some advice on recommissioning my scantronic 9800 which is still working perfectly except for the bell box, the tamper spring on the bell box has failed as I can open it with the panel in day and engineers mode and no tamper fault or sound I believe that there is a fault with the bell box pcb, I will probably be changing it to a texecom odyssey 3 in a few months as the reson8 seems bad quality
thanks for your help
sorry for the long post
back in February I asked some advice on recommissioning my scantronic 9800 which is still working perfectly except for the bell box, the tamper spring on the bell box has failed as I can open it with the panel in day and engineers mode and no tamper fault or sound I believe that there is a fault with the bell box pcb, I will probably be changing it to a texecom odyssey 3 in a few months as the reson8 seems bad quality
thanks for your help
sorry for the long post