the feed tank is full, the cold feed !!why doesn't do that when the heating is on?charlieboy3 said:it might be worth checking to see if the f&e tank has sufficient water in it, if this is ok i would suspect there is either a blockage in the cold feed or the boiler stat is not working correctly.
the pump runs only on H and its off on DHW and that as you know the classical system, its not a fully pumped systemAgile said:I think that you should be checking the pump !!!
It its too hot to handle then it is probably not turning! See FAQ.
Tony
OK thanks I check thatcharlieboy3 said:I still think there is a blockage in the cyl primaries, or the temp regulator in the cyl return has stuck(provided you have one)
thanks it was the boiler's statcharlieboy3 said:I still think there is a blockage in the cyl primaries, or the temp regulator in the cyl return has stuck(provided you have one)
Thanks matenamsag said:Told ya so .
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local