Hi
I'm getting the fault code where "Superwash" & "Door Locked" flashing. (Superwash is 2nd down - Below Delay timer.)
Looking at the Indesit fault codes ;-
//www.diynot.com/forums/viewtopic.php?p=1109298#1109298
It would seem as if I've got "
f04 light 2. pressure sw stuck on empty " - The opposite of this threads error.
The wash before the fault was a large old wool blanket, so I emptied the filter at the back underneeth the drum. Removed the black rubber 3 way splitter, with the ball inside the plastic cup with holes - cleaned this. Was full of gunk!!
Removed the clear plastic funnel, with the clear piping running upto the pressure sensor. This is clear, then I re-attached.
So plugged the machine back in >> turned on & water came through to wash the powder through from the tray. Water pumped out the back at the same time. Out the outlet pipe. Then within 20 seconds, fault code again..
Like I said, cleaned all the filters. So not sure what else to do.?
Does anyone have any ideas how to fix this?
I'm a mature student, so don't have the money to pay for engineers - but reasonably proficient at fixing issues myself with clear instructions
Many thanks for anyone's help & time