Hey I have a bath to fit were the base board. The part you screw your legs to. Looks to be under the fibre glass, is this correct. Don't want to screw in to this if it will cause a leak.
Bath base board encapsulated?
- Thread starter Fredstudio
- Start date
Sponsored Links
It is not uncommon.
The supplier should have issued fixing instruction with the correct screw type to use.
The supplier should have issued fixing instruction with the correct screw type to use.
Thanks have never seen one with the base board is the fibre glass before. Do you say its quite common though?
It is!
Sponsored Links
Installed an acrylic bath recently where there was no base board, the bath had extra thick strips of acrylic that you screwed the feet directly into. It's a little unnerving the 1st time but after a few you realise that it's fine 
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
