- Joined
- 3 Nov 2006
- Messages
- 3
- Reaction score
- 0
- Country
I've just done a straight replacement of a bathroom light fitting. Basically disconnected the two wires (there was no earth wire) from the old fitting and connected up to the new. The light worked ok but I had to take it down again because the securing screws were coming a bit loose. bolted it back up and this time it didn't work. The cover was an absolute pain to get off and on, so before I get it apart again, can someone answer this probably stupid question - if I have got the live and neutral wires the wrong way round this time would that be why it won't light? The fuse has not blown.