Slug, I fitted a netaheat duodecimal in my son's house. This boiler started doing the usual and soon the gas valve and pcb were replaced to make no difference. Issue was flagged again and another guy turns up this time tries to fit the replacement gas valve, had difficulty fitting the said valve, goes mental, takes the valve outside and was seen by son hurling the valve several times onto the pavement. He eventually replaced the gas valve and pcb. Still no difference.
I was in the area visiting him so phoned baxi to get someone out. Looked like someone would be out at leisurely pace. After some insistence a lad was sent out who could only be compared to the REAL bunnies on this forum. New valve fitted, new pcb fitted as previous guy with temper had shafted the pcb port, and adjusted the fan speed after new software was loaded onto the pcb he fitted.
I went onto fit another GA boiler after that. It has been a well behaved pussy cat
By the way, Baxi Solo does not have a drip tray, but does have a lip on the flue terminal to stop water ingress via outer section
I was in the area visiting him so phoned baxi to get someone out. Looked like someone would be out at leisurely pace. After some insistence a lad was sent out who could only be compared to the REAL bunnies on this forum. New valve fitted, new pcb fitted as previous guy with temper had shafted the pcb port, and adjusted the fan speed after new software was loaded onto the pcb he fitted.
I went onto fit another GA boiler after that. It has been a well behaved pussy cat
By the way, Baxi Solo does not have a drip tray, but does have a lip on the flue terminal to stop water ingress via outer section