my biasi is alway,s loseing pressure there are no leek,s in pipework or radiators totaly bamboozled. thank,s
couple of drops pressurized, ev, seems ok, no pr/drop over 5hrs, before it was less than 30min,s will check in morning, thank,shave you loooked at the pressure release valve vent outside?
If thats not leaking then call a gas registered engineer.
Tony
Pressure loss = leak, end of.
I had my BIASI combi installed last year October 2008 and it worked perfectly. After a year, the pressure started to drop to 0 bar and had been advised by CORGI Engineer to re-pressurised so I did and according to him, it is normal after a year. However, I had re-pressurised our boiler for 10x now for the past three weeks due to frequent pressure drops-on average every two days. I have asked another CORGI engineer for a specialist advice and told me to check for any leaks. I had checked all my radiators, piping and outlet for any leaks or discharge and even the ceilings for any presence of leaks, but found nothing. Phoned BIASI technical support, but said that they are only liable if the boiler has leak outside. To ensure, I put an empty transparent plastic to check for any discharge, but remained empty for a week now.
Now, I don't know what to do and where to seek advice. CORGI engineers couldn't suggest no more. Do I need to call for gas engineer for this kind of problem. Warranty of BIASI is only for 1 year unfortunately.
Any advise is mostly welcome. Thank you.
May I know what is the function of auto airvent?
May I know what is the function of auto airvent?
pleeeeeze
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local