Hi all been reading posts on here forever and decided to register and get help.
I have a baxi he 30 wall hung boiler feeding 3 radiators down stairs, 3 on the middle level and 2 on the top floor. its a 3 storey house with the boiler in the middle floor.
i am quite handy and can do most jobs. emptied air out of expansion vessel put new fixing in and filled it to 12 bar. no water comes out through the expansion vessel. PRV valve is not leaking, small (very) small drip from condensation pipe. about half a cup per week. no were near whats being put in every 2/3 hours.
tested all rad connections for leaks - none.
bottom floor is concrete with no visible signs on laeking, no wet floors anywhere nor wet ceilings.
same thing happened 16 months ago and the diafram!!!!! was changed, could it be the same thing!!!!
can anybody offer me any advice, it would be greatfully appreciated.
thanks
I have a baxi he 30 wall hung boiler feeding 3 radiators down stairs, 3 on the middle level and 2 on the top floor. its a 3 storey house with the boiler in the middle floor.
i am quite handy and can do most jobs. emptied air out of expansion vessel put new fixing in and filled it to 12 bar. no water comes out through the expansion vessel. PRV valve is not leaking, small (very) small drip from condensation pipe. about half a cup per week. no were near whats being put in every 2/3 hours.
tested all rad connections for leaks - none.
bottom floor is concrete with no visible signs on laeking, no wet floors anywhere nor wet ceilings.
same thing happened 16 months ago and the diafram!!!!! was changed, could it be the same thing!!!!
can anybody offer me any advice, it would be greatfully appreciated.
thanks