Boilermate 2000 - No hot water :(

Joined
17 Mar 2014
Messages
1
Reaction score
0
Location
Lincolnshire
Country
United Kingdom
Hi guys, hoping for some help.

Yesterday morning I awoke to the sound of a downstairs radiator draining itself onto the floor. I reconnected the pipe that'd jumped off (only got slightly scalded) and thought I'd just be down one carpet.
However I now don't have any hot water, I'm assuming the flow of water pulled a tarantula or similar from my f/e tank and blocked the system but I'm not sure exactly how to establish this - hoping it's just an airlock somewhere.
I have a boilermate 2000 with and ideal icos downstairs.
When I run a hot tap the HW pump runs on the boilermate but the water is stone cold.
Any advice would be greatly appreciated - let me know if you need further information..
 
Sponsored Links
Your boiler mate needs to be refilled. Instructions will tell you how.

Could be a tap, or stopcock, or maybe you need to fill with a bucket (no kidding). Depends on exactly how the fitter configured it.

You may need to reset your boiler too.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top