Bosch Logixx 1400 Wsahing Machine - Overflowing from draw

Joined
16 Jan 2013
Messages
1
Reaction score
0
Location
Kent
Country
United Kingdom
Problem with old machine. It has suddenly started overflowing from the detergent draw - towards the end of the cycle when adding softener. It is fine at the early stages when adding detergent. I have removed the draw and cleaned all components. When it floods, the water shoots out from all round the draw although it is shut tight.
 
Sponsored Links
hi...clean the draw and the roof of the dispenser compartment.also check the hose that goes to the drum.If all this fails, then look for a hose from the dispenser to the drum ( normally at the top and about half inch in diameter ), this will be a breather pipe that could get blocked.some models have a very thin pipe at the rear of the dispenser, this also gets blocked.if this pipe goes to a resevior which the drain hose connects to, this could also be blocked !!!!
basically, you have a blockage !
hope this helps...... :)
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top