My radiator at the back of the house had 8 mm pipe I connected 10mm pipes to these using olive connectors and teed off the flow and return moving it along the wall then reattached a new rad with new valves and also add another small radiator 3 foot the other way hence the tee both rads aren't heating up I've tried:
Bleeding (buckets out)
Turning all other rads off to move any blocks.
Is it the pipe being 10 mm rater than 8????
The pipe I laid behind the wall isn't totaly horizontal could it be that and there is a 90 degree turn in the pipe ....
Pleas help
Bleeding (buckets out)
Turning all other rads off to move any blocks.
Is it the pipe being 10 mm rater than 8????
The pipe I laid behind the wall isn't totaly horizontal could it be that and there is a 90 degree turn in the pipe ....
Pleas help