Hi everyone,
I want to fit a 12v cigarette lighter socket to my Mobility Scooter, so I can use a 12v tyre inflator.
The battery fitted is 12v 34a. I intend cannecting 2 wires (20 AWG) to the battery at one end, whilst the other end is connected to a Female Quick Disconnect Terminal. This circuit will be a permanent fixture on the Scooter.
The cigarette lighter socket will have a fuse fitted between the socket and the end of the wire, which will have the Male Quick Disconnect Teminal. This circuit will be plugged in when using the inflator, then removed.
Can anyone tell me if this will work and give me any ideas on which wires, and terminals to use, and which fuse.
Thanks,
Aidee
I want to fit a 12v cigarette lighter socket to my Mobility Scooter, so I can use a 12v tyre inflator.
The battery fitted is 12v 34a. I intend cannecting 2 wires (20 AWG) to the battery at one end, whilst the other end is connected to a Female Quick Disconnect Terminal. This circuit will be a permanent fixture on the Scooter.
The cigarette lighter socket will have a fuse fitted between the socket and the end of the wire, which will have the Male Quick Disconnect Teminal. This circuit will be plugged in when using the inflator, then removed.
Can anyone tell me if this will work and give me any ideas on which wires, and terminals to use, and which fuse.
Thanks,
Aidee