Hi Guys........am just replacing all ground floors to normal spec for building regs. Intention is to float concrete to an acceptable finish and avoid screeding..
The question is about adding glass fibres to the concrete mix which will be layed at a thickness of 100mm over floor area of 16sq mgr. I have heard about adding the fibre but don't know exactly what to ask for and does it work?.
Any thoughts out there...........thanks
The question is about adding glass fibres to the concrete mix which will be layed at a thickness of 100mm over floor area of 16sq mgr. I have heard about adding the fibre but don't know exactly what to ask for and does it work?.
Any thoughts out there...........thanks