I am replacing an old oven with the above. The cable in use at the moment is 6mm sq. from a 30amp fuse in the consumer unit to a connection box on the wall behind the oven via a fused connection box on the wall next to the oven. I think the total load is 6,700 watts.
The only connectors I can see on the back of the oven seem to have very thin wires to them (photo enclosed). Would it be correct to wire from the connection box to these terminals?
Any help appreciated thanks.
The only connectors I can see on the back of the oven seem to have very thin wires to them (photo enclosed). Would it be correct to wire from the connection box to these terminals?
Any help appreciated thanks.