Can a cooker hood and gas hob ignition system be supplied via a single fused spur?
I have two separate switched fused spurs fitted to a double backbox. Each has a twin and earth cable connected plus an additional short interconnecting cable which tells me they are wired as part of the ring main. They are currently fitted with 13 amp fuses but I can't imagine these are the rating required.
One spur feeds just the cooker hood and the other feeds just the gas hob ignition.
I would like to fit an extra socket in the vicinity of these spurs without disturbing the tiling. Can I connect both the cooker hood and hob ignition to one of the switched fused spurs to allow me to replace the other by a single switched socket?.
Thanks
I have two separate switched fused spurs fitted to a double backbox. Each has a twin and earth cable connected plus an additional short interconnecting cable which tells me they are wired as part of the ring main. They are currently fitted with 13 amp fuses but I can't imagine these are the rating required.
One spur feeds just the cooker hood and the other feeds just the gas hob ignition.
I would like to fit an extra socket in the vicinity of these spurs without disturbing the tiling. Can I connect both the cooker hood and hob ignition to one of the switched fused spurs to allow me to replace the other by a single switched socket?.
Thanks