My combi,worcester28siII,is situated in my loft hence all pipework and rads are below it,a couple of questions here for my piece of mind.
!. can I still run the c/h with one of my rads disconnected from the system.
2. If I drain the the system do I just bleed the pump and the rads when ready to start up the c/heating.
3. Will I need to do anything to the Expansion vessel,which according to the service manual is pressurisedat 0.5 bar.
regards
!. can I still run the c/h with one of my rads disconnected from the system.
2. If I drain the the system do I just bleed the pump and the rads when ready to start up the c/heating.
3. Will I need to do anything to the Expansion vessel,which according to the service manual is pressurisedat 0.5 bar.
regards