I need to install a small (6-8M) DIN rail enclosure in the airing cupboard, which is off the bathroom. I'm sourcing the enclosure so need to check if the requirement for the location.
Is the airing cupboard classed as still "part of" the bathroom (ie making it a special location). The door is louvered with no access via another room.
If it is "part of" the bathroom it would be zone 3 (the door is 0.7m and the mounting position for the enclosure 0.9m from the bath).
Is a particular IP rating required?
thanks
... and before anyone post the usual Part-P notice, I'll only be installing the *enclosure*. The kit in the enclosure will be installed by a part-p regd chappy.
Is the airing cupboard classed as still "part of" the bathroom (ie making it a special location). The door is louvered with no access via another room.
If it is "part of" the bathroom it would be zone 3 (the door is 0.7m and the mounting position for the enclosure 0.9m from the bath).
Is a particular IP rating required?
thanks
... and before anyone post the usual Part-P notice, I'll only be installing the *enclosure*. The kit in the enclosure will be installed by a part-p regd chappy.