Drayton Programmers the most useless and difficult ones?

Joined
23 Jun 2012
Messages
277
Reaction score
9
Location
Nottingham
Country
United Kingdom
Got a Drayton LP522 and honestly it's the most difficult and annoying user menu.

These models have been in use for 20 years at least.

They could have improved it in that time.

Had a siemens for 15 years and it was very easy to change times / change 5/2 to 7 day same etc without the need of scrolling through a set menu.

But the Drayton seem to be the only ones on the market.
 
Sponsored Links
Sponsored Links
Once they start playing up they're a big issue to sort no?
They may be, but so could any programmer.
I have an early Gen 2 Nest, it has performed faultlessly for the last 10 years.

But going back to your original question...
These models have been in use for 20 years at least.

They could have improved it in that time.
As there has been a gradual move to smart thermostats etc, has there really been a need to update the standard programmer?

As earlier, a Hive, or a Wiser, is a straight swap for many old Draytons - there is no need for any wiring changes; you get the benefits of a thermostat and programmer in one unit, the timings can be changed in a user friendly way; from the stat, or in the app.

Alternatively, there may be some who do not want to change, and are comfortable with what they have been using for decades. In which case, again, is there any need to change the old design?
 
They may be, but so could any programmer.
I have an early Gen 2 Nest, it has performed faultlessly for the last 10 years.

But going back to your original question...

As there has been a gradual move to smart thermostats etc, has there really been a need to update the standard programmer?

As earlier, a Hive, or a Wiser, is a straight swap for many old Draytons - there is no need for any wiring changes; you get the benefits of a thermostat and programmer in one unit, the timings can be changed in a user friendly way; from the stat, or in the app.

Alternatively, there may be some who do not want to change, and are comfortable with what they have been using for decades. In which case, again, is there any need to change the old design?
But wiring would need to be altered if the current stat and programmer are separate and the "smart" one is integrated.

Whilst technology does have its benefits, don't trust the "control heating by an app" would definitely be open to hacking one way or another.

Wouldn't be surprised pretty soon energy companies take over your heating for you, they already have smart meters installed for you. The way this country is going, it will be considered as "helping you manage" your heating all in the lies of energy efficiency, reducing carbon hoo haa whilst there's a plane landing every 45 seconds at Heathrow. That's just landings.
 
But wiring would need to be altered if the current stat and programmer are separate and the "smart" one is integrated.

Whilst technology does have its benefits, don't trust the "control heating by an app" would definitely be open to hacking one way or another.

Wouldn't be surprised pretty soon energy companies take over your heating for you, they already have smart meters installed for you. The way this country is going, it will be considered as "helping you manage" your heating all in the lies of energy efficiency, reducing carbon hoo haa whilst there's a plane landing every 45 seconds at Heathrow. That's just landings.
Hive and Wiser will be a straight swap on to your existing backplate.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top