- Joined
- 21 Apr 2016
- Messages
- 43
- Reaction score
- 1
- Country
I am trying to replace the drum bearings - Have full instructions
I have run into the a problem- I am trying to remove the pulley wheel from the Drun spindle.
It is fastened with a countersunk hex headed M10 x 25 bolt. I cannot get the bolt to budge.
I inserted an alan key into the hex head - could not get the bolt to move. Hammered on the alan key and damaged the alan key.
Could anyone sugggest how I can get the bolt out?
Many thanks
I have run into the a problem- I am trying to remove the pulley wheel from the Drun spindle.
It is fastened with a countersunk hex headed M10 x 25 bolt. I cannot get the bolt to budge.
I inserted an alan key into the hex head - could not get the bolt to move. Hammered on the alan key and damaged the alan key.
Could anyone sugggest how I can get the bolt out?
Many thanks