Ok well has a triton Jade 2, water just stopped, replaced solenoid coil and it worked again on cold water flow, switched on the power selector for max power and it stopped working again, coil had only been in for minutes........anyway assumed shower was faulty(5 plus yrs old) and replaced it with a Triton Rapid 3, brand new......fitted it and commissioned it as per instructions, all was fine on cold.......low and behold put the power selector to max (high) setting, switch shower on and immediately did same as previous shower, no flow. Had not altered anything on the electric from previous installation which had been working ok for last 5 years.
Any Ideas?
Any Ideas?