The guy's had his HW stat set at 65, right at the bottom of the cylinder, so the 55C rating of the original rubber has been somehat exceeded.
Now it looks orrible and is leaking a fair bit.
I've fitted plenty of Essex flanges but not replaced one. Has anyone had trouble doing so - assuming the hole's the right size!
There's plenty of limescale around , but I'm wondering if the copper could have eroded.
(22mm)
PIC
Now it looks orrible and is leaking a fair bit.
I've fitted plenty of Essex flanges but not replaced one. Has anyone had trouble doing so - assuming the hole's the right size!
There's plenty of limescale around , but I'm wondering if the copper could have eroded.
(22mm)
PIC