Advice Please
About to install a radial circuit for an extension.
The feed will come from a spare 30A plug in mcb from an old wylex cu and run in 4mm T&E.
There is currently no RCD protection on any of the circuits and my concern is that this new circuit will probably feed appliances outside, hence rcd protection is a must.
My options are to install a stand alone rcd fed from the spare fuse way then onto the circuit or to replace the complete cu for a split load type.
Any thoughts
About to install a radial circuit for an extension.
The feed will come from a spare 30A plug in mcb from an old wylex cu and run in 4mm T&E.
There is currently no RCD protection on any of the circuits and my concern is that this new circuit will probably feed appliances outside, hence rcd protection is a must.
My options are to install a stand alone rcd fed from the spare fuse way then onto the circuit or to replace the complete cu for a split load type.
Any thoughts