The old extractor fan in bathroom died so removed it and replaced it with new one (Oracstar EAV 1000 (SI)). Followed instructions. Now it comes on (and stays on interminably, forever) when light is switched off and goes off when light is on - not very useful.
In the fan itself, there are only two connectors available - live and neutral. I connected red wire from cable to the live one, and blue to neutral with the above results. Also available is yellow wire.
What should I do to make the fan come on with the light? PLEASE help!
In the fan itself, there are only two connectors available - live and neutral. I connected red wire from cable to the live one, and blue to neutral with the above results. Also available is yellow wire.
What should I do to make the fan come on with the light? PLEASE help!