I have a microbore system which uses a 2 pipe system with the mistral valves, so just one entry point to radiator. I would like to fit a towel warmer in the bathroom but as all that I can find have the pipe entries at the bottom, I need an elbow to connect to my mistral valve. All radiator tail connectors seem to be straight.
Anybody got any idea if there is such a connector or what arrangement I could use to avoid having to connect new pipes etc as the floor is solid concrete and so would involve lots of dirty drilling. Also don't fancy just bringing the microbore along the wall under the towel warmer as that would look cluttered and also prone to getting damaged.
Thanks
Andrew
Anybody got any idea if there is such a connector or what arrangement I could use to avoid having to connect new pipes etc as the floor is solid concrete and so would involve lots of dirty drilling. Also don't fancy just bringing the microbore along the wall under the towel warmer as that would look cluttered and also prone to getting damaged.
Thanks
Andrew