I am about to lay ceramic floor tiles on my newly screeded floor of my new conservatory, do i have to seal the concrete with anything or can i just go straight on with the tile adhesive. Also my wife has picked 450mm square tiles boy they are big any special tips on laying these big ones. What size notched trowel do you people use 6mm or 8mm or even bigger any advice greatly appreciated. Cheers
Floor Tiling
- Thread starter HIGH
- Start date
Sponsored Links
Go here for sealing advice etc.
//www.diynot.com/pages/fs/fs001.php
As for the depth of adhesive, the tile packaging usually has this information. Sometimes it needs to be a level layer of adhesive with a light comb over.
//www.diynot.com/pages/fs/fs001.php
As for the depth of adhesive, the tile packaging usually has this information. Sometimes it needs to be a level layer of adhesive with a light comb over.
Leave the screed for several weeks so it is fully dry before tiling.
I would use a thickbed trowel, the one with the semicircular notches and a powdered adhesive, suitable for large format tiles. BAL Motobond is what I use most.
No need to seal the screed, just make sure you clean off any dust.
Jason
I would use a thickbed trowel, the one with the semicircular notches and a powdered adhesive, suitable for large format tiles. BAL Motobond is what I use most.
No need to seal the screed, just make sure you clean off any dust.
Jason
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
