On the filling loop there was a slight leak out of the tap itself on the boiler side tap. I shut off the mains supply and the hot water outlet (for good measure, I suppose wanting to keep that water in the system).
Anyway after fitting the new loop, the system isn't repressurising. At first I thought the DCV was faulty and wasn't opening but after taking it off and carefully opening mains stopcock no water even came out of the pipe tail end but it does come out from the boiler side tap and under pressure so I suppose the stopcock is opening.
So I'm guessing there's a blockage formed when I drained the system an the question is what's the best method to back fill it or flush it and if anyone's had this before and sorted it.
Thanks in advance.
Anyway after fitting the new loop, the system isn't repressurising. At first I thought the DCV was faulty and wasn't opening but after taking it off and carefully opening mains stopcock no water even came out of the pipe tail end but it does come out from the boiler side tap and under pressure so I suppose the stopcock is opening.
So I'm guessing there's a blockage formed when I drained the system an the question is what's the best method to back fill it or flush it and if anyone's had this before and sorted it.
Thanks in advance.