Hello all,
I have a quick query about a setting on a Garamatic 9 electric garage door opener. I figured this forum would be more suitable than the Windows/Doors one but if it's not, admin feel free to move it.
When we press the open or close button on the remote, the door takes 3-4 seconds before it moves (meanwhile the lights flash 3 times). Apparently this is called Advance Warning Phase.
We're wanting to change this so there is no time delay at all. I asked the installer how to do it, and they were quite unhelpful - telling me that I should have bought a different brand that they wanted me to have. I've looked through the installation manual, and I can see reference to the setting but I can't work out how to change it.
If anybody can help I'd be very grateful. I've attached 4 images. 3 show references to the Advance Warning Phase from the manual, and the other a photo of the unit. I can see that Diagram 16.3 shows what the switches need to be set to to revise this, but I have no idea how to change 3 seconds to 0 :-/.
I haven't contacted the manufacturer as I know I will get the usual get a professional installer to come and do it etc. But for what I think is probably a simple 60secs task, nobody is going to come and do it.
Thanks in advance
I have a quick query about a setting on a Garamatic 9 electric garage door opener. I figured this forum would be more suitable than the Windows/Doors one but if it's not, admin feel free to move it.
When we press the open or close button on the remote, the door takes 3-4 seconds before it moves (meanwhile the lights flash 3 times). Apparently this is called Advance Warning Phase.
We're wanting to change this so there is no time delay at all. I asked the installer how to do it, and they were quite unhelpful - telling me that I should have bought a different brand that they wanted me to have. I've looked through the installation manual, and I can see reference to the setting but I can't work out how to change it.
If anybody can help I'd be very grateful. I've attached 4 images. 3 show references to the Advance Warning Phase from the manual, and the other a photo of the unit. I can see that Diagram 16.3 shows what the switches need to be set to to revise this, but I have no idea how to change 3 seconds to 0 :-/.
I haven't contacted the manufacturer as I know I will get the usual get a professional installer to come and do it etc. But for what I think is probably a simple 60secs task, nobody is going to come and do it.
Thanks in advance