Hi everyone, just a quickie I hope, I bled three of the rads and the boiler stopped, showing a pressure of 0.3 Bar. With the boiler still on I started re pressurising the system via the filling loop. When it reached 0.5 Bar, the boiler restarted and all is well. Now the system is running hot it's showing 1.0 Bar.
My question is can I or should I continue to add water to the system while it's up and running hot, and what pressure should it be when cold and then when hot?
Thanks in advance to you guys
My question is can I or should I continue to add water to the system while it's up and running hot, and what pressure should it be when cold and then when hot?
Thanks in advance to you guys