heatline condense

Joined
17 Oct 2008
Messages
17
Reaction score
0
Location
Hampshire
Country
United Kingdom
HI CAN ANYONE HELP,I HAVE A HEATLINE CONDENSE BOILER 3 YEARS OLD,WHEN I RUN HOT WATER IT GOES TO 30 DEGREES AND CUTS OUT,THE HEATING WORKS FINE,I WAS TOLD BUY AN ENGINEER IT NEEDS A POWER FLUSH £500, WOULD THE HEATING STILL WORK FINE IF IT NEEDED FLUSHED.. THANKS [/b]
 
Sponsored Links
Could be plate HE needs cleaning or the DHW thermistor.

Can't see that a full flush would cure this problem.
 
THANKS FOR THAT,THE ENGINEER CLEANED THE HE 2 MONTHS AGO,THE HOUSE HAS BEEN EMPTY 2 DAYS AFTER HE DID THAT,WHEN I EXPLAINED THIS ,THEN HE SAID IT WOULD NEED A POWER FLUSH,AS WELL ,DID NOT MENTION DHW thermistor,
 
ARE YOU VISUALLY IMPAIRED? NORMAL PEOPLE CAN READ FINE WITHOUT USING THE CAPSLOCK
 
Sponsored Links
I have one to do tomorrow!

If you only clean the secondary HE there can be enough dirt in the boiler to just block it up again within a few hours.

I expect he is one of those less scrupelous people who first say they will clean the HE and then find its worse that they expected and want another £500 to power flush the system.

We charge £136 to clean the plate, about £180 to clean the plate and the boiler and about £350 to power flush including the boiler and plate ( if there are not too many rads ).

Tony
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top