Hi, I have recently bought a triple light plate from Homebase, tried to install it as per instructions but when I took down the old light fitting down (just a standard light bulb fitting) there were 3 cables two old and one new connected to the fitting. I think the old cable controls the old light switch. The new light switch has a new cable.
I have wired the triple light plate, but the lights just stay on constantly.The only way I can control the light is by unscrewing the bulbs. I have tried so many combinations, one makes the light circuit just cut out.
Can anyone give me any advice as to where the wires should go, I have attached some pictures.
Thanks
I have wired the triple light plate, but the lights just stay on constantly.The only way I can control the light is by unscrewing the bulbs. I have tried so many combinations, one makes the light circuit just cut out.
Can anyone give me any advice as to where the wires should go, I have attached some pictures.
Thanks